Product Center
产品中心 / Product Center
AP Series Power Amplifier Features
· SMITHS' AP series of power amplifiers represent a new era of affordable, high-quality power amplification.
· All three models in the series are powerful, rugged and reliable. They are suitable for musicians, DJs, entertainers as well as houses of worship, discos and bars.
· Features include 0.755V or 1.4V user-selectable input sensitivity, Speakon and binding post outputs, Stereo/Parallel/Bridged Mono modes, Power/Fault/Signal Presence/Clip Indicators, Forced Air Cooling; and Short Circuit Protection , no-load, on/off and RFI.
technical parameter
model | AP450 | AP650 | AP800 |
Output Power 1KHz,<0.05%THD | |||
8 ohm power | 2X450W | 2X650W | 2X800W |
4 ohm power | 2X700W | 2X1000W | 2X1200W |
2 ohm power | 2X800W | 2X1200W | 2X1400W |
8 ohm bridge power | 1X900W | 1X1300W | 1X1600W |
4 ohm bridge power | 1X1400W | 1X2000W | 1X2400W |
Total Harmonic Distortion (1W at 20Hz-20kHz) | <0.1% | ||
signal to noise ratio | 11dB | ||
Frequency Response Range (Power Bandwidth +/-0.1dB) | 20Hz-25Hz±0.5dB | ||
damping coefficient | >300 | ||
Input impedance (balanced/unbalanced) | 20KΩ/10KΩ | ||
output socket | XLR type,3pan male | ||
input socket | XLR type, 3pin Female | ||
Power Requirements | 200-240V~50-60Hz | ||
Dimensions (W x H x D) | 483X455X88MM | 483X455X88MM | 483X455X88MM |
weight | 22kg | 22kg | 22kg |